--- In "tsao.terence" <> wrote:
>
> Dear GCC masters,
>
> I created hello.c in TS7260 (booting Debian from SD), and when I
> compiled with the following: "gcc-3.3 hello.c"
>
> I got the following error:
>
> gcc-3.3: installation problem, cannot exec `cc1': No such file or directory
>
> Has anyone encountered this problem before?
>
I spoke with a customer over the phone yesterday about this issue on this board
(I wouldn't be surprised if it was you!). I tested this on a factory SD card
image and it works fine. I recommend either re-installing the filesystem on
the last partition or simply re-imaging the SD card with image available on FTP
site.
Best Regards,
Derek Hildreth
------------------------------------
Embedded Systems Engineer
Technologic Systems
480.837.5200
------------------------------------
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|