I still can't get the iwconfig or other wireless tools to work.
I must be doing something wrong or I am going about it the wrong way.
I tried to copy iwconfig, iwevent, iwgetid, iwlist, iwpriv, iwspy to /usr/bin.
I then try to run the command and i get "/bin/sh: iwconfig: not found"
Do i need to somehow need to link this command to busybox in someway?
Are there any other ideas? I would like to get the wireless tools to work
within TS-linux (busybox).
Thank you,
Rob
--- In "Gonzalo A. de la Vega" <> wrote:
>
> On Tue, Feb 16, 2010 at 1:28 PM, nxtcomputing <> wrote:
>
> >
> >
> > Gonzalo,
> >
> > Sure enough you were right... I was missing the cfg80211.ko dependency.
> > Thanks your your help.
> >
> > Now the next question... How can I get the wireless tools working.. i.e.
> > iwconfig?
> >
> > When I did it, I just downloaded iwtools from TS ftp and just copied to
> /usr/bin/
>
> Gonzalo
>
>
> > -Rob
> >
> > --- In <ts-7000%40yahoogroups.com>, "Gonzalo A. de
> > la Vega" <gadelavega@> wrote:
> > >
> > > 2010/2/15 nxtcomputing <rwright@>:
> >
> > > > Does anyone know how to get USB wireless device working in the busybox
> > environment? I have a TS-7500 and a usb wireless adapter that uses the
> > realtek rtl8187 chipset.
> > > >
> > > > The device works just fine when I boot into the debian environment on
> > the micro-SD card. I would like to get the same adapter working without
> > loading the full debian distribution.
> > > >
> > > > In debian I found out the following:
> > > > lsmod shows: rtl8187, mac80211, cfg80211, eeprom_93cx6, usb_storage,
> > ehci_hdc, usbcore, sd_mod, scsi_mod
> > > >
> > > > modinfo rtl8187 shows: filename: /lib/modules/
> > 2.6.24.4/kernel/drivers/net/wireless/rtl8187.ko
> > > > depends: mac80211,eeprom_93cx6,usbcore
> > >
> > > I think mac80211 depends on cfg80211.
> > >
> > > > In busybox, I was hoping I could use:
> > > > navigate to files... cd /mnt/root/lib/.../wireless/
> > > > insmod rtl8187.ko
> > > >
> > > > and also load any other dependants... but this does not work.. i get
> > the error: insmod: can't insert 'rtl8187.ko': unknown symbol in module or
> > invalid parameter
> > > >
> > > > Any suggestions?
> > > >
> > >
> > > Check the dependencies of the dependencies.
> > > BTW, are you loading the dependencies first? insmod does not do that
> > > automatically like modprode does.
> > >
> > > Gonzalo
> > >
> >
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|