2010/2/15 nxtcomputing <>:
> Does anyone know how to get USB wireless device working in the busybox
> environment? I have a TS-7500 and a usb wireless adapter that uses the
> realtek rtl8187 chipset.
>
> The device works just fine when I boot into the debian environment on the
> micro-SD card. I would like to get the same adapter working without loading
> the full debian distribution.
>
> In debian I found out the following:
> lsmod shows: rtl8187, mac80211, cfg80211, eeprom_93cx6, usb_storage,
> ehci_hdc, usbcore, sd_mod, scsi_mod
>
> modinfo rtl8187 shows: filename:
> /lib/modules/2.6.24.4/kernel/drivers/net/wireless/rtl8187.ko
> depends: mac80211,eeprom_93cx6,usbcore
I think mac80211 depends on cfg80211.
> In busybox, I was hoping I could use:
> navigate to files... cd /mnt/root/lib/.../wireless/
> insmod rtl8187.ko
>
> and also load any other dependants... but this does not work.. i get the
> error: insmod: can't insert 'rtl8187.ko': unknown symbol in module or invalid
> parameter
>
> Any suggestions?
>
Check the dependencies of the dependencies.
BTW, are you loading the dependencies first? insmod does not do that
automatically like modprode does.
Gonzalo
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|