Hi Derek,
Can you give me the instruction of reinstalling the filesystem on the last
partition. Or Should I call you later for it?
thanks!
--- In "Derek" <> wrote:
>
> --- In "tsao.terence" <tsao.terence@> wrote:
> >
> > Dear GCC masters,
> >
> > I created hello.c in TS7260 (booting Debian from SD), and when I
> > compiled with the following: "gcc-3.3 hello.c"
> >
> > I got the following error:
> >
> > gcc-3.3: installation problem, cannot exec `cc1': No such file or directory
> >
> > Has anyone encountered this problem before?
> >
>
> I spoke with a customer over the phone yesterday about this issue on this
> board (I wouldn't be surprised if it was you!). I tested this on a factory
> SD card image and it works fine. I recommend either re-installing the
> filesystem on the last partition or simply re-imaging the SD card with image
> available on FTP site.
>
> Best Regards,
>
> Derek Hildreth
> ------------------------------------
> Embedded Systems Engineer
> Technologic Systems
> 480.837.5200
> ------------------------------------
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|