kenkyee wrote:
> I found a few other instances of this by searching...anyone know what causes
> this?
> I took this 1GB flash drive and formatted it as FAT on a Windows PC before
> plugging it in, so it definitely works :-P
> <snip>
I would guess that the device is resetting itself due to power issues.
What are you supplying the 7260 with? Also not sure if the 7260 runs 5v
from the input to the USB or if it uses the 5v charge-pump supply that
some TS arm boards do, if so it can't really supply 500ma. Is this a
flash disk? Is there any way to supply it with 5v other then the 7260?
Maybe a USB extension cable with the 5v and gnd wires cut out and wired
to a external supply?
--
Jason Stahls
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|