kenkyee wrote:
> ok...after trying 3 different flash drives and two different usb card
> readers, I'm thinking USB drive support is either broken or only works w/ the
> specific flash drive that comes w/ the dev kit (which I don't have).
>
> Symptom is this:
> - plug flash drive in and the system log claims it can't read the partition
> table because the unit is not ready, so you can't do fdisk on
> /dev/scsi/host1/bus0/target0/lun0/disc
> - let it sit for a little while and watch the light on the flash drive (the
> flash drives and USB readers all have lights)
> - when it lights up, hit the fdisk command and it'll read the partition table
> successfully
> - the light stays on only for a few seconds and then turns off and you lose
> read access again
>
> This board is running kernel 2.4.26-ts11 if that matters.
> Someone has to have seen this...feels like a code bug in the usb driver to me
> :-P
Might also be a power issue. Try supplying the device with external power.
--
Jason Stahls
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|