ts-7000
[Top] [All Lists]

[ts-7000] Re: Boot problems with Linux 2.6.21 using bootloader

To:
Subject: [ts-7000] Re: Boot problems with Linux 2.6.21 using bootloader
From: "j.chitte" <>
Date: Sat, 09 May 2009 20:15:08 -0000
--- In  "inboxfullforsubash" <> 
wrote:
>
> Hi,
> 
> I have a TS-7250 which has Linux 2.4.26-ts11 installed on it. The board has 
> 128 MB NAND Flash and 64MB RAM. I ran into this issue of insufficient time 
> resolution (10 ms on gettimeofday() calls) while doing code execution delay 
> measurements on the current Linux 2.4 kernel. I read one of the posts in this 
> group that said the time resolution bug has been fixed in the Linux 2.6 
> kernel. So now I am trying to install 2.6 on the board. But I have been 
> running into issues while booting. Here is what I did:
> 
> * Dowloaded the Linux 2.6.21-ts kernel and compiled it successfully with 
> arm-none-linux-gnueabi(compiler crosstool-linux26-3.4.4-2005q3-2.tar.gz). 
>

why are you trying to use 2.6.21-ts ??

it states clearly on the TS site that this kernel is "untested" with NAND 
flash. As you note above, this is what you have on 7250. You will not be able 
to use your 128M yaffs2 root file system!

Check back on this list, I think you need at least 2.6.28 or 2.6.29 to have 
that support working. 

Since Matthieu (and others) has kindly done all the hard work and got working 
what TS did not "test" I dont see much sense in not benefitting from his work. 
Just go for 2.6.29.1 and his latest patch set. 

If all you want is more timer resolution it can probably be done as Jim says on 
2.4 . Indeed if you look in the file section (menu on the left here) you will 
find Eddie from TS kindly posted a modified ts8 kernel with just that.

>>
This is a new kernel that uses a 1021 Hz system clock in place of the standard 
1 00 Hz system clock. By changing the frequency of the system clock performance 
may be affected. If you notice anything let me know at 
>>

That should be just a drop in replacement for the standard kernel. Since you 
seem to be completely new at all this you will certainly find that a much 
easier route if that's all you need.





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU