Hi Adriano,
I am slowly getting up to speed on embedded linux.
I have a ts7390 TPC and I have set up a development environment on
Ubuntu 8.10. On this I have installed both Etch and Lenny Root file
systems and have them shared by adding the appropriate entries to
/etc/exports. I have also downloaded the Armv4t cross compiler from
Martin's page. However, I am having difficulty being able to chroot into
my development root file systems from the ts7390 SD linux.
With respect to what you have done I would like some further info
see below
--- In "Adriano Naspolini" <>
wrote:
>
> Donal,
> After installing armel/lenny on my tpc-7390 and making QT with eabi
crosstool i noticed my application became much faster.
>
> Maybe you can try on etch whit eabi "-static" (if you didn't). For me
the program's got too large.
>
> However, I recommend to change because lots of libraries can't handle
oabi endianess (i think tiff on qt, for example).
>
> So, if you (or someone else) want to try:
>
> - make a new sd with ts-ftp sd-image;
Can you expand on the steps required to do this
> - install armel-lenny also from ftp;
Is this installed on the dev server?
> - change /etc/modules to install the modules you want to use;
Understood
> - dowload armv4t-crosstool-linux-gnueabi from Martin's page;
Done
> - compile QT and your application with this crosstool...
I want to try wxWidgets.
Please also if you can describe the steps involved in doing a chroot to
the dev server.
> Regards
>
> Adriano
Many thanks in advance,
Best regards
Noel Diviney.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|