ts-7000
[Top] [All Lists]

[ts-7000] Re: Accelerated Graphics in TS7390

To:
Subject: [ts-7000] Re: Accelerated Graphics in TS7390
From: "Adriano Naspolini" <>
Date: Wed, 29 Apr 2009 02:33:29 -0000
Donal,
After installing armel/lenny on my tpc-7390 and making QT with eabi crosstool i 
noticed my application became much faster.

Maybe you can try on etch whit eabi "-static" (if you didn't). For me the 
program's got too large.

However, I recommend to change because lots of libraries can't handle oabi 
endianess (i think tiff on qt, for example).

So, if you (or someone else) want to try:

- make a new sd with ts-ftp sd-image;
- install armel-lenny also from ftp;
- change /etc/modules to install the modules you want to use;
- dowload armv4t-crosstool-linux-gnueabi from Martin's page;
- compile QT and your application with this crosstool...

Regards

Adriano



--- In  "Donal O'Connor" <> wrote:
>
> Hi Adriano,
> 
> I think it's possible alright. By just implementing the blit method in the
> QScreen class.
> I know the bit that can be used for blitting, the LSB of the Green, but I
> amn't sure how the code goes.
> 
> If you look at http://tech.groups.yahoo.com/group/ts-7000/message/9176
> Fotis has something implemented for QT successfully for the TS7300
> 
> I've emailed him and waiting on reply.
> 
> Regards,
> Donal
> 
> On Wed, Apr 1, 2009 at 12:53 AM, Adriano Naspolini <>wrote:
> 
> >   Hi Donal,
> >
> > First of all, I'm also interested in this driver, but sincerely don't know
> > if it's possible.
> >
> > I'm working with QT4.4 and also using Qgraphicsview. I noticed that some
> > transformations may become expensive depending on the way you&#341;e doing
> > them...
> > So, maybe it's a good approach trying to review your code and the examples
> > in the example directory before trying to write a graphics accelerator.
> >
> > Regards,
> >
> > Adriano
> >
> >
> > --- In  <ts-7000%40yahoogroups.com>, "Donal
> > O'Connor" <donaloconnor@> wrote:
> > >
> > > Hi There,
> > >
> > > Does anyone know if the TS7390 is capable of handling accelerated
> > graphics.
> > > I have an application in QT4.5 and it uses QGraphicsView for animating a
> > > very simple menu but unfortunately this causes the ARM CPU to go up
> > towards
> > > 100% utilization and ends up with a low FPS count.
> > >
> > > Any ideas if the TS7390 has potential to accelerate graphics or anyone
> > has a
> > > driver developed?
> > >
> > > Cheers.
> > >
> > > Regards,
> > > Donal
> > >
> >
> >  
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU