Re: [ts-7000] Re: usb 1-1: reset full speed USB device using ep93xx-ohci and address 2

[Bill Gatliff <>]

charliem_1216 wrote:

 > So if there is a problem, it stops during boot, and these messages 
loop forever?

Yes.

 >  Any errors thrown in normal use, if it does boot normally?

No, although occasionally it will boot fine and then drop into the 
message loop and ultimately die a few seconds later.

Interestingly, when I turn on CONFIG_USB_DEBUG the problem goes away.  
Of course, that floods my kmesg buffer and eats CPU time, so I'd prefer 
not to do that.

But that suggests there's a race condition somewhere in the code.


b.g.

-- 
Bill Gatliff




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/