ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: Ts-7300 wifi access point

To:
Subject: Re: [ts-7000] Re: Ts-7300 wifi access point
From: Jason Stahls <>
Date: Fri, 20 Mar 2009 18:05:46 -0400
ts7300 wrote:
> one more thing noticed before starting up bridge utility (brctl),I am able to 
> ping 10.64.1.1 from eth0 interface.But once I add eth0 in bridge using brctl 
> addif br0 eth0 and then start ping 10.64.1.1 its fail.I am not getting why 
> its fail to ping from eth0 when eth0 interface is added in bridge.

Don't set a IP address for interfaces that are part of the bridge, just 
the bridge interface itself and it should work.

Jason Stahls


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU