please suggest something upon below insmod bridge.o problem.
--- In "ts7300" <> wrote:
>
> Thanx for prompt reply.Now I am trying to use bridge mode.First of all
> started with insmod/libmodules/2.4.26-ts11/kernel/net/bridge.o
> /lib/modules/2.4.26-ts11/kernel/net/bridge.o:
> /lib/modules/2.4.26-ts11/kernel/net/bridge.o: unresolved symbol
> br_ioctl_hook
> /lib/modules/2.4.26-ts11/kernel/net/bridge.o:
> /lib/modules/2.4.26-ts11/kernel/net/bridge.o: unresolved symbol
> br_handle_frame_hook
> Can any have any Idea on this.Or I have to install some additional package
> for this.
> waiting for eary response.
> ----------------------------------------------
> --- In Jason Stahls <jason@> wrote:
> >
> > ts7300 wrote:
> > > below routing table
> > > Destination Gateway Genmask Flags Metric Ref Use Iface
> > > 10.64.0.0 * 255.255.0.0 U 0 0 0 wlan0
> > > 10.64.0.0 * 255.255.0.0 U 0 0 0 eth0
> > > default 10.64.1.1 0.0.0.0 UG 0 0 0 wlan0
> > > default 10.64.1.1 0.0.0.0 UG 0 0 0 eth0
> > > can you elborate bit more about how to use bridge mode.according to
> > > routing table subnet mask is same but again doubt is on gateway when
> > > wlan0 set 10.64.1.1 Gateway then its might replace eth0 interface with
> > > wlan0 interface thats why fail to ping when wlan0 default gateway is
> > > used.
> >
> > You shouldn't have IP's on the interfaces. I'm not sure if the TS
> > kernel has the required code compiled in or as a module, or at all but
> > you need Ethernet Bridging support in the kernel. You also need the
> > program brctl to create a bridge. You can then assign the bridge
> > interface a IP. The bridge interface can be called anything.
> >
> > --
> > Jason Stahls
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|