[ts-7000] Re: no /dev/ttyTS0 after insmod tsuart-rf on TS-7800

["hajeezone3" <>]

> If udev isn't running the device node won't be populated automatically. 
>   This will happen if you are running in the fastboot environment, or if 
> udev isn't enabled in fullboot (which it is by default on our load, but 
> it appears you are using a new install of lenny and I don't know what 
> its default is).
> 
> You should be able to run a command like "mdev -s" to populate the node. 
> (At least in fastboot, not sure if this utility is in the path from 
> fullboot).
> 
After restarting UDEV all the nodes are populated and the device is working.

Thanks for the response,

--
Hajee





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/