Re: [ts-7000] no /dev/ttyTS0 after insmod tsuart-rf on TS-7800

[Michael Schmidt <>]

hajeezone3 wrote:
> Hi,
> 
> After loading the tsuart-rf on a TS-7800 there is no /dev/ttyTS0.
> 
> The module is loading with no problems.
> dmesg output says:
> TS-UART/RF2 found at port 0x0100
> ttts10 at MMIO 0xee000102 (irq = 70) is a TSUART
   ^^^^^^
> 
> 
> I am using a TS-7800 with lenny and a TS-RF2-ZIGBEE board.
> 
> Has somebody an idea what going wrong?

Nothing is wrong.

The 2.6 drivers use different device names than 2.4.

The dmesg output is informing you that the device file created is 
/dev/ttts10.


> Hajee

  ______   Best Regards,
|__  __/                  Michael Schmidt
    ||                   Software Engineer
    ||echnologic Systems (EmbeddedARM.com)
    || (480)        16525 East Laser Drive
    |/ 837-5200   Fountain Hills, AZ 85268
        http://oz.embeddedarm.com/~michael


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/