[ts-7000] Re: no /dev/ttyTS0 after insmod tsuart-rf on TS-7800

["ksubbu_msc" <>]

--- In  "hajeezone3" <> wrote:
>
> Hi,
> 
> After loading the tsuart-rf on a TS-7800 there is no /dev/ttyTS0.
> 
> The module is loading with no problems.
> dmesg output says:
> TS-UART/RF2 found at port 0x0100
> ttts10 at MMIO 0xee000102 (irq = 70) is a TSUART
> 
> 
> I am using a TS-7800 with lenny and a TS-RF2-ZIGBEE board.
> 
> Has somebody an idea what going wrong?
> 
> ---
> Hajee
>

hai,

please once again confirm the driver has loaded or not
in proc file system

bye




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/