Hi,
you can try with "dialog" or "Xdialog" for more simplistic and easy
implementation GUI
"dialog" dont need X.
regards
Marcos
Jim George wrote:
>
> Perhaps GTK, using the framebuffer backend, might provide a lightweight
> GUI, no need for X.
>
> Larry wrote:
> >
> > Another good choice is FLTK - open source and free.
> >
> > Donal wrote:
> >
> >> You might want to consider QT/Embedded as well as it's quite simple
> >> to create GUI's with it.
> >> Performance of QT/Embedded seems to be an issue when it comes to
> >> rendering graphics however, but normal window applications seem fine.
> >>
> >>
> >>
> >> On Fri, Mar 13, 2009 at 3:36 PM, PeterElliot <
> <egroups%40pjelliot.com>
> >> < <egroups%40pjelliot.com>>> wrote:
> >>
> >> Hi Jason,
> >>
> >> Interesting application.
> >>
> >> I ended up using my own graphics library for my 7300 and 7390
> >> systems as it gave me more control over how everything appeared,
> >> but a number of people are using off-the-shelf toolkits with the
> >> 7390.
> >>
> >> Regards,
> >>
> >> PJE
> >>
> >>
> >>
> >> --- In <ts-7000%40yahoogroups.com>
> >> <ts-7000%40yahoogroups.com>, "leemurs72" <> wrote:
> >> >
> >> > Hello,
> >> >
> >> > I just joined the group since I am the proud owner of a
> >> TS-TPC-7390 that I intend to use as the instrument display panel
> >> on my sailboat.
> >> >
> >> > Essentially, it will be acting as an NMEA-0183 data colletor
> >> from a USB GPS, an Airmar DST800 depth/speed/temperature sensor
> >> and an Airmar PB150 weather station. The two Airmar units will
> >> connect to the COM1 and COM2 headers.
> >> >
> >> > I am thinking of building the GUI in wxPython or perl/Tk.
> >> >
> >> > I am not sure if the 4 screw posts will be sufficient to
> >> provide a good seal along the top and bottom. I would have
> >> preferred to see a screw at the 12- and 6-o'clock positions on
> >> the bezel.
> >> >
> >> > I am relatively new to developing on embedded systems so I
> >> apologize in advance if I ask "obvious" questions. In the past, I
> >> have done a lot with OpenBSD running from a CF card and a ramdisk
> >> (see the flashboot project) but little outside of that. So while
> >> I plan to read the archives and lurk for the next while, I do
> >> want to launch my boat by mid-May so there may be some things I
> >> need help with.
> >> >
> >> > Cheers,
> >> >
> >> > /Jason
> >> >
> >>
> >
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|