Hi Jason,
Interesting application.
I ended up using my own graphics library for my 7300 and 7390 systems as it
gave me more control over how everything appeared, but a number of people are
using off-the-shelf toolkits with the 7390.
Regards,
PJE
--- In "leemurs72" <> wrote:
>
> Hello,
>
> I just joined the group since I am the proud owner of a TS-TPC-7390 that I
> intend to use as the instrument display panel on my sailboat.
>
> Essentially, it will be acting as an NMEA-0183 data colletor from a USB GPS,
> an Airmar DST800 depth/speed/temperature sensor and an Airmar PB150 weather
> station. The two Airmar units will connect to the COM1 and COM2 headers.
>
> I am thinking of building the GUI in wxPython or perl/Tk.
>
> I am not sure if the 4 screw posts will be sufficient to provide a good seal
> along the top and bottom. I would have preferred to see a screw at the 12-
> and 6-o'clock positions on the bezel.
>
> I am relatively new to developing on embedded systems so I apologize in
> advance if I ask "obvious" questions. In the past, I have done a lot with
> OpenBSD running from a CF card and a ramdisk (see the flashboot project) but
> little outside of that. So while I plan to read the archives and lurk for
> the next while, I do want to launch my boat by mid-May so there may be some
> things I need help with.
>
> Cheers,
>
> /Jason
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|