> Bottom line: TS chose closed source a) to protect real or perceived IP
> in their lightweight FPGA/SD interface, and b) because they signed an
> NDA for the SD card interface specs (even though much of the info has
> since become available).=20
>
> TS intends the module to be linkable with customer-compiled kernels,
> but there were some rough points earlier as the module was OABI and
> didn't link to EABI kernels.=20
>
> Eddie D. fixed that and posted a mini-howto, with makefile changes, here:
> http://tech.groups.yahoo.com/group/ts-7000/message/11889
> http://tech.groups.yahoo.com/group/ts-7000/message/11897 and following.
Ah, I missed all that in my searches - obviously I need to refine what I
was searching for
Thanks for the information - I think that's exactly what I was looking for
--
Matthew Harrell
Bit Twiddlers, Inc.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|