I'm going to be building a 2.6 kernel with Matt's patch shortly for my 7260
but I wanted to check and see how the system did with the TS 2.6.21 kernel
first. How do I properly create an initrd file for this kernel? I need to
preload the sdcard module to work with my root filesystem and I notice that
the old TS 2.4 initrd image is an ext2 filesystem. The initrd on my laptop
(running 2.6) uses a cpio / gz file. The readmes I've seen are split on
this and I've never worked with initrd before. Do I want to create a
cpio / gz file and will that work with redboot?
Does anyone happen to have a kernel and initrd image they would mind sending
me from Matt's 2.6.27 patches? I really just want to test how some of my
software behaves under the later kernel before investing a lot of time into
it
--
Matthew Harrell Light travels faster than sound.
Bit Twiddlers, Inc. That's why some people seem smart
until you hear them speak
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|