ts-7000
[Top] [All Lists]

[ts-7000] Re: Bluetooth problem

To:
Subject: [ts-7000] Re: Bluetooth problem
From: "notnerdyenough" <>
Date: Thu, 29 Jan 2009 19:08:38 -0000
Hi Fabio & Charlie,

I realize this one is a bit old but I'm having the same problem.  I'm 
running 2.6.21-ts on a TS-7800 board.  I've tried a number of 
different dongles but the result is the same.  "hcitool scan" always 
shifts scanned addresses by prepending "02 01" and truncating the 
last 2 octets.

For example, if I have bluetooth device with address 
11:22:33:44:55:66 hcitool scan will return

Scanning ...
        02:01:11:22:33:44        n/a

I'm assuming that backporting the Bluetooth & USB patches from a more 
recent version will fix the problem (since yours seemed to work fine 
on 2.6.23) but I am new to Linux and am not sure where to go to learn 
how to do this.  Any pointers?

Much thanks,
josh


--- In  "Fabio Vaz" <> wrote:
>
> Charliem,
> 
> I had to use the TS 2.6.21 because it has support for ZD1211 and 
for 
> the TSGSM1. I didn't manage to compile these drivers on 2.6.23.
> 
> Now I don't know if it is harder to try to make Bluetooth work on 
TS 
> 2.6.21 or make TS-GSM1 and ZD1211 work on 2.6.23.
> 
> Best,
> Fabio.
> 
> --- In  "charliem_1216" <charliem_1216@> 
> wrote:
> >
> > Hi --
> > 
> > --- In  "Fabio Vaz" <fvazsilva@> wrote:
> > >
> > > Hi guys,
> > > 
> > > I have a problem with Bluetooth running Kernel 2.6.21 on a 
> > TS-7200. I 
> > > was running Dan Smolik 2.6.23 Kernel and it was working fine. 
> > 
> > Well, I guess you have a reason to revert to 2.6.21?  Which one, 
> > vanilla or TS?  There were lots of bluetooth changes in patch-
> 2.6.22 
> > and patch-2.6.23; perhaps you could back-port them if you need to 
> > stay at 2.6.21.
> > 
> > > 
> > > On Kernel 2.6.23 I scan and connect to devices just fine. You 
can 
> > see 
> > > the scan bellow :
> > > 
> > > :root# hcitool scan
> > > Scanning ...
> > >         00:07:CF:58:CD:AB       Pen LZ8170501X8
> > ----------^^^^^^^^^^^
> > Hmm, this data ... 
> >  
> > > 
> > > On Kernel 2.6.21 the scan doesn't return the name of the device 
> > and 
> > > after that I can't pair it too using the hcitool cc. See the 
scan 
> > > following :
> > > 
> > > :dex# hcitool scan
> > > Scanning ...
> > >         00:01:00:07:CF:58       n/a
> > ----------------^^^^^^^^^^^
> >  ... is now shifted; interesting.  You might ask on a bluetooth 
> > list; it doesn't look like an arm or TS board problem.
> > 
> > Regards, ...... Charlie
> >  
> > > 
> > > 
> > > 
> > > Is this a known issue ? 
> > > 
> > > 
> > > Regards,
> > > Fabio Vaz.
> > >
> >
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
  • [ts-7000] Re: Bluetooth problem, notnerdyenough <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU