Re: [ts-7000] Re: flash ECC error - any way to restore flash partitions on TS-7400?

[Jason Stahls <>]

Dave da brave wrote:
> I had the same problem but luckly had a TS-9441 board. 
>
> There simply is no other way since you can't enable the network boot 
> or anything... the Serial prom of the TS-9441 contains the bootimage. 
> Starting from there you can try to get your board up and running 
> again.
>
> I also downloaded a binary from TS website and installed it, 
> result "got ECC-error" for starters. Lucky I had a backup made with 
> mtdcp of my first 2 partitions. Do you have a backup you can put on 
> an NFS-server somewhere? 
>
> G'luck & get a TS9441!

Could you not blast the flash via JTAG or is it not on the JTAG chain?

Jason Stahls

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/