There is some problem with the line termination of echo. The problem
is that the echo version of busybox does not support "-e" nor "-n"
options... i.e.: echo won't work.
You can use picocom or maybe write e trivial version of "echo" that
writes the wright line terminantion... or maybe I will.
Gonzalo
On Wed, Jan 28, 2009 at 9:23 AM, Fabio Ardeola <> wrote:
> You can install and use the picocom terminal emulation program to access
> your Zigbee module.
>
> to install picocom
> # apt-get install picocom
> to access your Zigbee module
> # picocom /dev/ttyTS0 9600
>
> Regards,
> Fabio
>
> ----- Original Message ----
> From: mohit.khanna <>
> To:
> Sent: Wednesday, January 28, 2009 12:14:16 AM
> Subject: [ts-7000] Re: TS-RF2-ZIGBEE
>
> Hi
>
> I am new to using TS-RF2-ZIGBEE with TS-7250 board, I have setup the
> drivers I think, the blue light on xbee board does glow when I send
> some something on the serial port eg. echo "data" \dev\ttyTS0
>
> Can anyone tell me how to read the output of AT commands.
>
> I tried the following but didnt get any output.
>
> echo "+++" \dev\ttyTS0
> echo "ATDL" \dev\ttyTS0
>
> cat \dev\ttyTS0
>
> I want to enter the command mode and change some settings of xbee.
>
> Thanks
> Mohit Khanna
>
> Can anyone
>
> --- In "Gonzalo A. de la Vega"
> <> wrote:
>>
>> On Tue, Dec 23, 2008 at 11:27 AM, Fabio Ardeola <> wrote:
>> > Hi
>> > Does anyone know the default TS-RF2-ZIGBEE configuration? I mean,
>> > network identifier,
>>
>> PAN ID: 0x3332 (acording to the manual)
>>
>> > node identifier and
>>
>> none = 0
>>
>> > destination node identifier.
>>
>> all = 0xFFFF
>>
>> I think you should be able to check this with AT commands.
>>
>> Gonzalo
>>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|