Charlie,
>>> Seems the TS-7390 isn't too well documented. Looking at the
>>> schematic, COM1 header carries signals for the UART1 serial ports at
>>> RS-232 level. I believe other pins on COM1 header can either serve as
>>> the modem control / flow control signals of UART1, or as Tx/Rx of two
>>> other RS-232 ports, depending on how the port is opened in linux.
>> There is no flow control for any serial port available on the TS-7390.
>
> Oh, sorry. I looked at the schematic, and thought it was the same as
> the TS-7800, which *does* double-up the pin functions for flow control
> or other ports. See the TS answer in this thread, for example:
> http://tech.groups.yahoo.com/group/ts-7000/message/12200
I think that what you describe is probably correct and I missed that
somehow. This is my first experience with the TS ARM boards (I used TS
x86 boards years ago) and I'll have to take some time and go back and
look into this further. I thank you very much for your help! If you
get to Columbus, Ohio I'll buy lunch. :)
--
Regards,
Paul Breneman
www.TurboControl.com
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|