just add your command into rc.local
For a debian system it will be
/etc/init.d/rc.local
or in TS linux it will be
/etc/rc.d/rc.local
just add your command into /etc/init.d/rc.local
Daniel
--- In "bwa4992" <> wrote:
>
> I have a TS-7260 board with a TS-CAN1 daughterboard on the PC-104 bus.
> I am running the full Debian system (2.4.26-ts-11) from an SD card in
> the TS-7260.
>
> I can successfully load the lincan driver from the console prompt with:
>
> # cd /usr/lincan/modules
> # insmod lincan-ts11.o hw-tscan1 baudrate=500
>
> But I would like to have the system load the driver at boot time, and
> I haven't found a way to make this happen.
>
> I've tried a couple of methods including modifying the /etc/modules
> file directly, and using modconf to set up the driver at boot time,
> but nothing has worked so far.
>
> Has anyone been able to get the lincan driver to load at boot time?
> What steps did you take?
>
> Thanks,
>
> Ben
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|