[ts-7000] TS-7300 fastboot issue

["Sukhoi-37" <>]

Hi,

I am trying to get back on this board. I've done this way:


a) Default test setup - WORKING
  - No SD card, JP2 and Hyperterminal 
    Technologic Systems BOOT message comes up in the terminal. 

b) Now, downloaded the sdimage.dd.bz2 for the fast boot. 
  - 1GB SanDisk Ultra II SD card, JP6 and Hyperterminal 
    Downloaded,
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7300-linux/binaries/ts-images/sdimage.dd.bz2

$bunzip2 sdimage.dd.bz2
$dd if=sdimage.dd of=/dev/sdb1    

I don't see any BOOT message on the Hyperterminal with JP6. 

Should I put JP2 along with JP6? Please advice. 

thanks. 


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/