hmmm... I don't see that message... I posted the "trivial" patch in
the same link I sent before.
http://astrum.frm.utn.edu.ar/gonzalo/?p=46
Please let me know if instructions are not enough.
On Mon, Dec 15, 2008 at 4:32 AM, darxkies <> wrote:
> Hi
>
> Thank you very much!!! :)
>
> It works.
>
> Though I am getting a "Division by zero in kernel" message.
>
> Function entered at [<c0091adc>] from [<c0024d00>]
> r7 = 00000036 r6 = 7FC5F118 r5 = 00000000 r4 = 00000000
> Division by zero in kernel.
> Function entered at [<c0029030>] from [<c0029b50>]
>
> Do you know what it might be?
> I would be very thankful if you could post the patch online.
>
> Thank you again!
>
> Chriss.
>
> --- In "Gonzalo A. de la Vega"
> <> wrote:
>>
>> OK, I got it, just go here:
>> http://astrum.frm.utn.edu.ar/gonzalo/?p=46
>>
>> I can clean the code and issue a patch... don't know what plans does
> TS have.
>>
>> Gonzalo
>>
>> On Thu, Dec 11, 2008 at 10:00 AM, darxkies <> wrote:
>> > Hi
>> >
>> > I got the error message you mentioned. Did anyone else experienced
>> > that? Did it work for anyone?
>> >
>> > Chriss.
>> >
>> > --- In "Gonzalo A. de la Vega"
>> > <gadelavega@> wrote:
>> >>
>> >> On Wed, Dec 10, 2008 at 9:23 AM, darxkies <darxkies@> wrote:
>> >> > Hi
>> >> >
>> >> > I have a TS-7260 Board and used the 2.6 Kernel provided by
> EmbeddedARM
>> >> > to boot it.
>> >> >
>> >> > But I don't see the COM3 Device Node even though the driver
> tsuart1.ko
>> >> > is loaded.
>> >>
>> >> Check the kernel messages with dmesg, you should see one that says:
>> >> "Unable to register the driver"
>> >> I have traced this back to the function __register_chrdev_region()
>> >> returning EBUSY (=16) The mentioned function is called through a
>> >>
>> >> Also, the tsuart1.c file has the device name defined as "ttts"
> which I
>> >> don't think is correct (should be ttyTS)
>> >>
>> >> I don't have much time to work on this, so it may take a couple of
>> >> days. Any help is most welcome.
>> >>
>> >> Gonzalo
>> >>
>> >
>> >
>>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|