Hi
Thank you very much!!! :)
It works.
Though I am getting a "Division by zero in kernel" message.
Function entered at [<c0091adc>] from [<c0024d00>]
r7 = 00000036 r6 = 7FC5F118 r5 = 00000000 r4 = 00000000
Division by zero in kernel.
Function entered at [<c0029030>] from [<c0029b50>]
Do you know what it might be?
I would be very thankful if you could post the patch online.
Thank you again!
Chriss.
--- In "Gonzalo A. de la Vega"
<> wrote:
>
> OK, I got it, just go here:
> http://astrum.frm.utn.edu.ar/gonzalo/?p=46
>
> I can clean the code and issue a patch... don't know what plans does
TS have.
>
> Gonzalo
>
> On Thu, Dec 11, 2008 at 10:00 AM, darxkies <> wrote:
> > Hi
> >
> > I got the error message you mentioned. Did anyone else experienced
> > that? Did it work for anyone?
> >
> > Chriss.
> >
> > --- In "Gonzalo A. de la Vega"
> > <gadelavega@> wrote:
> >>
> >> On Wed, Dec 10, 2008 at 9:23 AM, darxkies <darxkies@> wrote:
> >> > Hi
> >> >
> >> > I have a TS-7260 Board and used the 2.6 Kernel provided by
EmbeddedARM
> >> > to boot it.
> >> >
> >> > But I don't see the COM3 Device Node even though the driver
tsuart1.ko
> >> > is loaded.
> >>
> >> Check the kernel messages with dmesg, you should see one that says:
> >> "Unable to register the driver"
> >> I have traced this back to the function __register_chrdev_region()
> >> returning EBUSY (=16) The mentioned function is called through a
> >>
> >> Also, the tsuart1.c file has the device name defined as "ttts"
which I
> >> don't think is correct (should be ttyTS)
> >>
> >> I don't have much time to work on this, so it may take a couple of
> >> days. Any help is most welcome.
> >>
> >> Gonzalo
> >>
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|