OK, I got it, just go here:
http://astrum.frm.utn.edu.ar/gonzalo/?p=46
I can clean the code and issue a patch... don't know what plans does TS have.
Gonzalo
On Thu, Dec 11, 2008 at 10:00 AM, darxkies <> wrote:
> Hi
>
> I got the error message you mentioned. Did anyone else experienced
> that? Did it work for anyone?
>
> Chriss.
>
> --- In "Gonzalo A. de la Vega"
> <> wrote:
>>
>> On Wed, Dec 10, 2008 at 9:23 AM, darxkies <> wrote:
>> > Hi
>> >
>> > I have a TS-7260 Board and used the 2.6 Kernel provided by EmbeddedARM
>> > to boot it.
>> >
>> > But I don't see the COM3 Device Node even though the driver tsuart1.ko
>> > is loaded.
>>
>> Check the kernel messages with dmesg, you should see one that says:
>> "Unable to register the driver"
>> I have traced this back to the function __register_chrdev_region()
>> returning EBUSY (=16) The mentioned function is called through a
>>
>> Also, the tsuart1.c file has the device name defined as "ttts" which I
>> don't think is correct (should be ttyTS)
>>
>> I don't have much time to work on this, so it may take a couple of
>> days. Any help is most welcome.
>>
>> Gonzalo
>>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|