Hi,
I have the same symptom, but it's due to the poor power supply
connector, int the power connector it's just make the contact with the
pin on the side.
Try to solder the connector, or play with it to be sure it make a good
contact.
It should work.
regards
arno
--- In "mmcdonal2001" <> wrote:
>
> Hello,
>
> The Ts7260 I have won't boot properly. The red light flashes then it
> spits out the initial message on the console i.e.:
>
> >> TS-NANDBOOT, Rev 1.01 - built 10:30:52 Dec 200 2005
> >> Copyright (C) 2005, Technologic Systems
>
> then the red light flashes again and the message repeats itself. This
> continues indefinitely.
>
> I'm observing this with minicom through COM1. JP2 and JP3 are on,
> everything else open. Not sure what's going on, anyone had this
problem?
>
> Thanks.
>
> Mike
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|