Hello,
> Does that mean that the hang on reset problem that both of the
> TS-7800s we've tested has been well and truly fixed?
I'm not aware of any bugs regarding the WDT ever existing. Although if
you are seeing a problem we are interested in trying to reproduce the
problem. Did you compile ts7800ctl yourself? If so have you made any
changes to the code? If not can you send the md5sum of the ts7800ctl
binary? What revision of the TS-7800 are you using? If you are using a
rev C board, on the back of the board on the JTAG header do you see a
cut and jumper?
Any other information you can provide that would document how to
reproduce this problem would be very helpful.
> I ask because I had strange behaviors after using ts7800ctl -f to try
> out the watchdog. Sometimes it just hung, other times I could do some
> commands (like ls (but only in the current directory) and date) but
> not many. I believe Technologic told us there was a problem with the
> reset pin usage on the TS-7800 (or something similar to that) and the
> watchdog needed that to work correctly to do its job.
There was a problem that was discovered that was fixed by a cut and
jumper on the JTAG header. If this fix is not applied the failure
condition would be the board would not properly reboot or boot
consistently.
//Eddie
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|