[ts-7000] Re: TS-7800 External Watchdog Timer

["dawydiuk" <>]

Hello,
 
> I would really like to know:
> 
> -How to set the time out of the watchdog
> -How to enable and disable the watchdog 
> -How to pet the watchdog
> 
> This all refers to the AVR WDT over the I2C interface. I understand
> the I2C just not the commands and how the WDT is controlled in the AVR.

You can use the ts7800ctl utility to enable, feed, and disable the
WDT. The -f option will feed/enable the WDT for 8 seconds, the -d
option will disable the WDT. If the WDT is fed, and not refed with in
8 seconds the TS-7800 will power cycle.

//Eddie



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/