--- In "dawydiuk" <> wrote:
>
> You can use the ts7800ctl utility to enable, feed, and disable the
> WDT. The -f option will feed/enable the WDT for 8 seconds, the -d
> option will disable the WDT. If the WDT is fed, and not refed with in
> 8 seconds the TS-7800 will power cycle.
Does that mean that the hang on reset problem that both of the
TS-7800s we've tested has been well and truly fixed?
I ask because I had strange behaviors after using ts7800ctl -f to try
out the watchdog. Sometimes it just hung, other times I could do some
commands (like ls (but only in the current directory) and date) but
not many. I believe Technologic told us there was a problem with the
reset pin usage on the TS-7800 (or something similar to that) and the
watchdog needed that to work correctly to do its job.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|