|
Hello, We have a new software release for the TS-7800 - dated Jun102008. Everything is available at our FTP site. The new software fixes some reported bugs, enables boot-time of 0.69s from Flash, uses JFS as the SDCard filesystem, etc... More info can be found through this release note: http://www.embeddedarm.com/about/resource.php?item=343 --- In "Anouk Ahamitet" <> wrote: > > Some notes for folks moving from the 7250 to the 7800 would have > been a HUGE help. For example, things like using rtc7800 instead of > hwclock, necessity of /activating/ the PC104 bus before use, the fact > that (a) the serial ports on the 7800 don't seem to exist until > 'modprobe tsuart7800' is run, and then the devices created by that > command ARE NOT the serial port names: instead the standard /dev/t tySn > names work on the 7800 (where they don't on the 7250). Thanks for your comments. A platform migration guide is on our TO-DO list. Meanwhile, the commands pc104on and pc104off are now available at the fastboot prompt. The tsuart7800 module is now loaded during boot by the linuxrc script and the devices are available right after. Regards, Ronald. __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |