--- In "Razvan Ionut
Stoian" <> wrote:
>
> --- In Jim Jackson <jj@> wrote:
> >
> >
> >
> >
> > On Thu, 29 May 2008, Razvan Ionut Stoian wrote:
> >
> > > --- In Triffid Hunter
<triffid_hunter@>
> wrote:
> > >>
> > >> On Wed, 28 May 2008, Razvan Ionut Stoian wrote:
> > >>
> > >>> For some reason the system freezes after vmlinux starts
> > >>> to decompress. This is what I got:
> > >>>
> > >>> Uncompressing
> > >>>
Linux.............................................................
> > >>>
> > >
>
........................................................................
> > >>>
> > >>> What am I doing wrong?
> > >>
> > >> Mine do that if my toolchain is broken
> > >>
> > >
> > > This is odd. I used the toolchain provided by TS.
> > > Any good alternatives?
> >
> > You can check if you toolchain is ok, by compiling the supplied
2.4
> kernel
> > source, with the default configuration. If the 2.4 kernel fails
to boot
> > then it may be your toolchain. If 2.4 works, then you have a 2.6
issue.
> >
> Hi.
>
> I managed to boot the 2.6 kernel. Apparently, the initial image was
> just too big. Now it boots, but my SBC freezes due to a kernel
panic:
> ----------------------------------------------------
> Kernel panic - not syncing: Attempted to kill init!
> ----------------------------------------------------
>
> Any ideas?
>
> thank you,
> R
>
That's probably the point at which it switches from initrd to the
disk fs. Check you rootfs is compatible with your kernel and
accessible.
Can yo boot to it over nfs using your new kernel?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|