ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: Cannot boot from CF

To:
Subject: Re: [ts-7000] Re: Cannot boot from CF
From: Jim Jackson <>
Date: Thu, 29 May 2008 09:23:29 +0100 (BST)


On Thu, 29 May 2008, Razvan Ionut Stoian wrote:

> --- In  Triffid Hunter <> wrote:
>>
>> On Wed, 28 May 2008, Razvan Ionut Stoian wrote:
>>
>>> For some reason the system freezes after vmlinux starts
>>> to decompress. This is what I got:
>>>
>>> Uncompressing
>>> Linux.............................................................
>>>
> ........................................................................
>>>
>>> What am I doing wrong?
>>
>> Mine do that if my toolchain is broken
>>
>
> This is odd. I used the toolchain provided by TS.
> Any good alternatives?

You can check if you toolchain is ok, by compiling the supplied 2.4 kernel 
source, with the default configuration. If the 2.4 kernel fails to boot 
then it may be your toolchain. If 2.4 works, then you have a 2.6 issue.


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU