--- In Jim Jackson <> wrote:
>
>
>
>
> On Thu, 29 May 2008, Razvan Ionut Stoian wrote:
>
> > --- In Triffid Hunter <triffid_hunter@>
wrote:
> >>
> >> On Wed, 28 May 2008, Razvan Ionut Stoian wrote:
> >>
> >>> For some reason the system freezes after vmlinux starts
> >>> to decompress. This is what I got:
> >>>
> >>> Uncompressing
> >>> Linux.............................................................
> >>>
> >
........................................................................
> >>>
> >>> What am I doing wrong?
> >>
> >> Mine do that if my toolchain is broken
> >>
> >
> > This is odd. I used the toolchain provided by TS.
> > Any good alternatives?
>
> You can check if you toolchain is ok, by compiling the supplied 2.4
kernel
> source, with the default configuration. If the 2.4 kernel fails to boot
> then it may be your toolchain. If 2.4 works, then you have a 2.6 issue.
>
Hi.
I managed to boot the 2.6 kernel. Apparently, the initial image was
just too big. Now it boots, but my SBC freezes due to a kernel panic:
----------------------------------------------------
Kernel panic - not syncing: Attempted to kill init!
----------------------------------------------------
Any ideas?
thank you,
R
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|