[ts-7000] Re: Value too large errors on debian arm image

["j.chitte" <>]

PS booting from debian-sarge-udev-11-15-2007.tar.gz image:

                                                                                
modprobe: Can't open dependencies file /lib/modules/2.4.26-ts11/
modules.dep (No)
Checking all file 
systems...                                                    
fsck 1.37 (21-Mar-
2005)                                                         
... 
done.
                                                                       
mount: unknown filesystem type 
'sysfs'                                          
find: .: Value too large for defined data 
type                                  
find: .: Value too large for defined data 
type                                  
find: .: Value too large for defined data 
type                                  
find: .: Value too large for defined data 
type                                  
Setting up 
networking...done.                                                   
Setting up IP spoofing protection: 
rp_filter.                                   
Enabling packet 
forwarding...done.                                              
Configuring network interfaces...run-parts: failed to open directory /
etc/netwoe
run-parts: failed to open directory /etc/network/if-up.d: Value too 
large for de
run-parts: failed to open directory /etc/network/if-pre-up.d: Value 
too large fe
RPC: sendmsg returned error 
101                                                 
nfs: RPC call returned error 
101                                                



without trying to resolve the other issues and just booting in we see 
the same "Value too large" issues.

regards.




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/