[ts-7000] Re: How do I tell if the watchdog timer has gone off?

["Mike Charnoky" <>]

To clarify: both the TS-7250/TS-7260 do have a watchdog timer.  The
TS-7250 does not have the ability to detect if it was the watchdog
that caused a system reset.  With the TS-7260 you can read a register
to see if the watchdog caused the reset (as opposed to a power failure)

Regarding the watchdog, the hardware manual states "Use only the
watchdog timer implemented by Technologic Systems in the CPLD.  The
watchdog timer included in the EP9302 has serious problems"


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/