--- In "Michael" <> wrote:
Hi Michael,
> The 1.5 second delay is because the code is waiting for all 2k
samples a
> 2kHz to complete. If you need only one sample, write a value of
0xFFFF to
> only the first location in the memory mapped buffer space, then
initiate the
> conversion and poll this value for a non-FFFF value. This should
take a lot
> less time, probably not more then 500us (since that's how fast samples
> arrive), although I'm not sure how long the command to the AVR takes.
thank you again. That helps.
Could I start another conversion before the first one finishes?
Jiri
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|