It would be easier to help if you cut and pasted the EXACT
lines and errors instead of retyping parts.
On Wed, 26 Mar 2008, pouettagada wrote:
> Hello I've a problem...
>
> I do what yoy tell me : fconfig, typing fis load vmlinux , typing exec
> -c "console=ttyAM0,115200 root=/dev/hda1" ....
>
> I saved it but when I type "fconfig -l" where It would be the line
> with console... (after fis load vmlinux) I have a "not a string :
> 0x1FDF04E".
>
> So I enter an other config and I retype the old config with
> cosole=ttyAM0,115200 root=/dev/mtdblock1"
>
> But now When I restart (with reset command) I have an error.
>
>
> Error : invalid number 'console=ttyAM0,115200 root=/dev/mtdbloc1' for
> [physical] starting address
>
>
>
> What can I do??
>
>
> --- In Syedsmt <> wrote:
>>
>> To use Debian in Ts-7250, you need tho configure the redboot, I not
> sure how to configure the ts-7250. What have i done, I already switch
> from the TS-Linux to Debian the boot on CF card in ts-7200.
>>
>> Here is the instruction how to configure the RedBoot, you need to
> read the user manual for TS-72xx before to do this. Becareful while
> configure the RedBoot
>>
>> Redboot Configuration
>>
>> By default setting, RedBoot scriptinstructions load the Linux kernel
> from the flash chip for its root system. Toview this script press
> Ctrl+C key after power up the board until shows theRedBoot prompt;
>>
>> RedBoot>
>>
>> After
>> that, types the following command at the RedBoot prompt to view the hold
>> script;
>>
>> RedBoot>fconfig ?l
>>
>> By entering `fconfig'
>> command we changed the RedBoot script. To change to Debian Linux OS
> by changing
>> root=/dev/mtdblock1 to root=/dev/hda1 in the script. Insert this
> following
>> command the to change the script
>>
>> 1.
>> Type fis load vmlinux and press enter
>>
>> 2. Typeexec -c "console=ttyAM0,115200
>> root=/dev/ hda1" an pressenter
>>
>> 3.
>> Press enter until shows want to save this configuration
>>
>> 4.
>> Check back the script with fconfig ?l whether bothcommand already
> insert or not
>>
>> 5. Type reset command to reboot.
>>
>>
>> --syedsmt--
>>
>>
>>
>>
>>
>>
>> ----- Original Message ----
>> From: pouettagada <>
>> To:
>> Sent: Tuesday, March 18, 2008 5:51:44 PM
>> Subject: [ts-7000] TS-7250 : how to use DEBIAN?
>>
>> Hello,
>>
>> I have read in the doc that's possible to run Debian on the TS-7250.
>> But there is no "how to do"...
>>
>> So is it really possible? And how?? I prefer to boot on a SD card
>> (with usb adapter). So if Debian died, my 7250 will continue to work...
>>
>> Some one can help me???
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
> ____________________________________________________________________________________
>> Be a better friend, newshound, and
>> know-it-all with Yahoo! Mobile. Try it now.
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|