To: | |
---|---|
Subject: | Re: [ts-7000] TS-7250 : how to use DEBIAN? |
From: | Syedsmt <> |
Date: | Tue, 18 Mar 2008 10:50:17 -0700 (PDT) |
To use Debian in Ts-7250, you need tho configure the redboot, I not sure how to configure the ts-7250. What have i done, I already switch from the TS-Linux to Debian the boot on CF card in ts-7200. Here is the instruction how to configure the RedBoot, you need to read the user manual for TS-72xx before to do this. Becareful while configure the RedBoot Redboot Configuration By default setting, RedBoot script instructions load the Linux kernel from the flash chip for its root system. To view this script press Ctrl+C key after power up the board until shows the RedBoot prompt; RedBoot> After that, types the following command at the RedBoot prompt to view the hold script; RedBoot>fconfig –l By entering ‘fconfig’ command we changed the RedBoot script. To change to Debian Linux OS by changing root=/dev/mtdblock1 to root=/dev/hda1 in the script. Insert this following command the to change the script 2. Type
exec -c "console=ttyAM0,115200
root=/dev/ hda1" an press
enter 3. Press enter until shows want to save this configuration 4. Check back the script with fconfig –l whether both command already insert or not 5. Type reset command to reboot. ----- Original Message ---- From: pouettagada <> To: Sent: Tuesday, March 18, 2008 5:51:44 PM Subject: [ts-7000] TS-7250 : how to use DEBIAN? Hello, Looking for last minute shopping deals? Find them fast with Yahoo! Search. __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [ts-7000] Re: TS7400 serial ports - 5V or 3.3V?, evil666demonic |
---|---|
Next by Date: | [ts-7000] Re: noise level on MAX197 on 7250, j.chitte |
Previous by Thread: | [ts-7000] TS-7250 : how to use DEBIAN?, pouettagada |
Next by Thread: | [ts-7000] Re: TS-7250 : how to use DEBIAN?, pouettagada |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU