--- In "Michael" <> wrote:
Hi Michael,
thank you for your reply.
>The sample rate (2kHz) and number of samples taken per command (2048)
are design
> limitations inherent in the AVR program and the mechanism it needs
to use to
> storing samples,
I don't need so much samples, one is enough, but I need it immediately
after the conversion. As I saw in the ts7800ctl.c there is wait
(sleep) for 1.5 sec.
What can I do to get the sample sooner? Do I need to change the code
in AVR? Can I do this?
> I'm going to be updating the preliminary manual (the bleeding edge
version
> on my personal support page; the official released version won't change
> until I'm finished) with some more information on the ADC as I can
piece it
> to together, hopefully that will help.
I'll check your home page regularly :-).
Thanks
Jiri
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|