Hi Pavo --
--- In "osmicadu" <> wrote:
>
> Still nothing I downloaded Token2 Plus trial and installed it, when i
> connect everything it says that com1 is connected but nothing more. As
> i understand from the startup manual I should get some data on the
> screen as soon as I plug TS-7250 in the power source.
Things to check:
* Make sure jumper JP2 is installed.
* Make sure jumper JP4 is _not_ installed.
* Get rid of hyperterm (which you've done already)
* Make sure you turn off hardware and software flow control
* Verify you are using a _null_modem_ cable
Is there any LED activity when you power the board?
You could also try to connect via telnet, if you have a network set up.
Regards, ...... Charlie
>
> Thanks,
> Pavo
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|