I've done some digging around, and it looks like your zd.o and zd_b.o are
incompatible.
Using your zd.o, the insmod succeeds buts ifconfig wlan0 does not - no such
device or
address.
Using insmod zd_b.o on its own is much more profitable and yields loads of
output in
dmesg:
ZD1211B - http://zd1211.ath.cx/ - r83
Based on www.zydas.com.tw driver version 2.5.0.0
usb.c: registered new driver zd1211b
Release Ver = 4810
zd1211:bulk out: wMaxPacketSize = 40
zd1211:bulk in: wMaxPacketSize = 40
zd1211:interrupt in: wMaxPacketSize = 40
zd1211:interrupt in: int_interval = 1
zd1211:bulk out: wMaxPacketSize = 40
EEPORM Ver = 4810
zd1211:USB Download Boot code success
zd1211:MAC address = 00:02:72:69:bc:09
zd1211:AddrEntryTable = f7c6
zd1211:RF_Mode = 80000584
PA type: 0
Airoha AL2230S_RF
zd1211:Pure B-Mode
zd1211:AllowedChannel = 000007ff
zd1211:LinkLEDn = 200
AllowedChannel = 000107ff
Region:16
zd1205: (exit) zd1205_config, src/zd1205.c line 2601
zd1205: (exit) zd1205_init, src/zd1205.c line 8570
zd1205: (enter) zd1205_open, src/zd1205.c line 4353
zd1205: (exit) zd1205_open, src/zd1205.c line 4436
After this, ifconfig wlan0 up succeeds.
In the Techologic FTP server, there are four, count 'em, version of zd.o in the
directory ts-
modules:
Name Size MD5sum
zd-r51.o 263206 7e1340aa0d79db6ee6b247037ab46cad
zd-r83-b.o 312644 ea5d1c980a6de67caac2a3fe4935fce5
zd-r83.o 311436 067fe55699354f526e5f680a3139a109
zd.o 299666 75cbd70e73d5704db17c8d269bae37df
The one called zd-r83-b.o has the same md5sum as your zd_b.o.
The zd-t51 contains strings like kernel-version: 2.4.26-ts9, so should be
avoided.
Whoever, I am still stumped as for what to do after 'iwconfig wlan0'. I can't
find any
instructions or howtos. Obviously I would like to have the inteface configured
at boot
time.
Do I need to do iwconfig wlan0 essid MYESSID?
Do I need to do iwconfig wlan0 ap xx:xx:xx:xx:xx?
I get results from iwscan:
$ /usr/local/bin/iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: 00:18:4D:3F:87:72
ESSID:"Martin"
Mode:Master
Frequency:2.462 GHz (Channel 11)
Extra:SignalStrength=100%,LinkQuality:100%
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Extra:bcn_int=100
$
But still show Not Associated:
$ /usr/local/bin/iwconfig wlan0
wlan0 802.11b/g NIC ESSID:"Martin"
Mode:Managed Frequency=2.437 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
Retry:on RTS thr=2432 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:97/100 Signal level:100/100 Noise level:7/100
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:21320 Invalid misc:855 Missed beacon:0
even after doing iwconfig wlano ap xx:xx:xx:xx:xx
Thank,
Martin
--- In "mattfishburn" <> wrote:
>
> > ps - could you post the size and MD5sum of both zd.o and zd_b.o?
>
> :net# pwd
> /lib/modules/2.4.26-ts11/kernel/net
> :net# ls -al zd*
> -rw-r--r-- 1 root root 299666 Oct 20 2006 zd.o
> -rw-r--r-- 1 root root 312644 Jul 18 2007 zd_b.o
> :net# md5sum zd*
> 75cbd70e73d5704db17c8d269bae37df zd.o
> ea5d1c980a6de67caac2a3fe4935fce5 zd_b.o
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|