OK, now I tried switching to udhcpc for kicks, and I get
"Operation failed." when it tries to run pump.
This is crazy. Getting a DHCP client running on a linux box shouldn't
be this hard.
I had this same problem with a TS-7260 board months ago, and it never
got resolved.
I've tried running against DHCP servers on OpenWRT, default Linksys
boxes, and our regular Slug based system that dozens of machines
connect happily to every day.
Mean time between email responses from Technologic seems to be 2 days.
I was honestly about to roll out a prototype product based on the Wifi
box to at least 100 customers. I'm at the point of going back to the
drawing board on this though.
Is ANYONE running DHCP on a TS box while running full Debian?
Pete
--- In "Peter Santangeli" <> wrote:
>
>
> Unfortunately, no joy. Here's the output I get when I run ifup
> --verbose eth0
>
> Configuring interface eth0=eth0 (inet)
>
> run-parts --verbose /etc/network/if-pre-up.d
>
> run-parts: executing /etc/network/if-pre-up.d/bridge
>
> run-parts: executing /etc/network/if-pre-up.d/wireless-tools
>
> run-parts: executing /etc/network/if-pre-up.d/wpasupplicant
>
>
>
> dhclient3 -pf /var/run/dhclient.eth0.pid -lf
> /var/run/dhclient.eth0.leases eth0
> Internet Systems Consortium DHCP Client V3.0.4
>
> Copyright 2004-2006 Internet Systems Consortium.
>
> All rights reserved.
>
> For info, please visit http://www.isc.org/sw/dhcp/
>
>
>
> Listening on LPF/eth0/00:d0:69:40:e8:e5
>
> Sending on LPF/eth0/00:d0:69:40:e8:e5
>
> Sending on Socket/fallback
>
> receive_packet failed on eth0: Network is down
>
> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
>
> send_packet: Message too long
>
>
> --- In "charliem_1216" <charliem_1216@> wrote:
> >
> > --- In "Peter Santangeli" <peter@>
> > wrote:
> > >
> > > I asked this a few months ago, and never really got a response.
> > I'm
> > > having a heck of a time getting dhcp running on a ts7400. I'm
> > running
> > > from the SD card, and pump seems to be failing with:
> > >
> > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
> > > send_packet: Message too long
> > >
> > > I've tried using pump, dhcpcd, dhcp3-client, all fail the same
> > way,
> > > like it is a driver problem.
> > >
> > > Does anyone have dhcp running on a ts board running debian?
> > >
> > > Pete
> > >
> >
> > Hi Pete --
> >
> > This is usually because your MTU is set too low. What
> > does 'ifconfig eth0' say? MTU=64 is a common but bad value, and
> > gives the 'Message too long' message. Try 'ifconfig eth0 MTU 1400'.
> >
> > Set your dhcp client config to ignore the MTU returned by the
> > (presumably crappy) dhcp server. (ie for dhcp3-client, remove
> > the 'interface-mtu' from /etc/dhcp3/dhclient.conf).
> >
> > Or if you can control the MTU value the dhcp server hands out, set
> > it to something reasonable.
> >
> > Regards, ....... Charlie
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|