[ts-7000] Re: How to create bzImage from Debian Sarge OS for ARM 9 Technologic TS7300?

["lyy_henry" <>]

--- In  "jaspreetsingh_619" <>
wrote:
>
> Hello,
> 
> I am new to field of embedded systems and currently working on a 
> project on the same. My task is to port debian OS on arm 9 board 
> TS7300. 
> I have to create bzimage file that has to ported on the hardware via 
> ethernet port. I have been following this link for guidance:
>  http://www.embeddedarm.com/linux/ARM.htm 
> 
> I have downloaded all the required softwares mentioned in the link 
> including gnu toolchain and sarge debian OS. Now, the problem i am 
> facing is how to create a bzimage file out of the tar.bz file of 
> sarge debian so that it can be ported via the ethernet board. 
> I am aware that the toolkit provided with the board includes debian 
> OS built in on the flash card, but my requirement is to create the 
> requisite binary image on my own.
> Could anyone provide some sort of guide to do the same as my 
> experience in this field is minimal and I really want to learn more..
> Thanking you in anticipation
> Regards 
> Jaspreet Singh
>

You need to have a cross-development toolchain ready and download the
kernel and compile it. The best bet that I would suggest you is too
read this thread:

http://tech.groups.yahoo.com/group/ts-7000/message/9109

I hope this would help.

Henry



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/