ts-7000
[Top] [All Lists]

[ts-7000] Re: How to create bzImage from Debian Sarge OS for ARM 9 Techn

To:
Subject: [ts-7000] Re: How to create bzImage from Debian Sarge OS for ARM 9 Technologic TS7300?
From: "jaspreetsingh_619" <>
Date: Wed, 09 Jan 2008 13:39:34 -0000
--- In  "lyy_henry" <> wrote:
>
> 
> You need to have a cross-development toolchain ready and download the
> kernel and compile it. The best bet that I would suggest you is too
> read this thread:
> 
> http://tech.groups.yahoo.com/group/ts-7000/message/9109
> 
> I hope this would help.
> 
> Henry
>

thank you very much for your help. I read through the post you gave
the link to which had the link to a pdf describing the process.It was
in much detail was very helpful before I seemed to have run into some
trouble with this error:
 /scripts/kconfig/mconf.c:91:error: static declaration of
'current_menu' follows non-static declaration

 I took cue from this link :
http://www.busybox.net/lists/uclibc/2005-July/012187.html

and overcame this error to find a new one

scripts/kconfig/mconf.c:90: error: expected `=', `,', `;', `asm' or
`__attribute__' before `struct'

Can anyone help?

Regards
Jaspreet Singh



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU