Sorry, I don't have a 2.6 system. I do know that in a 2.4 system tsusart-rf
depends on tsuart0. This caused me a bit of grief before I figured it out.
Here are the relevant lines from my "lsmod":
Module Size Used by Not tainted
tsuart-rf 1108 0 (unused)
tsuart0 9360 0 [tsuart-rf]
Bob Bond
-----Original Message-----
From: On Behalf Of
wizwally
Sent: Thursday, December 06, 2007 3:14 AM
To:
Subject: [ts-7000] Re: TS-GSM1 and TS-RF2-ZIGBEE devices for TS-7800
--- In "Michael Schmidt" <> wrote:
>
>
> On Tue, November 13, 2007 4:36 pm, wizwally wrote:
> > Hi,
> > I bought a TS-7800 with TS-GSM1 (GR64 module) and TS-RF2-ZIGBEE
boards.
> > Which modules have to be loaded to access the two boards?
> > Are the drivers still in development?
>
> Yes. Although the TS-GSM1 may work under 2.6 without a modified driver,
> we haven't tested this yet, and anticipate there may be a few tweaks
> needed before it will work. The TS-RF2-ZIGBEE board needs a modified
> version of the tsuart-rf2.c module ported to 2.6, which is in the
> pipeline.
>
> >
> > thanks
> > G. Saderis
>
> Best Regards,
>
> _________
> Michael / _____/chmidt michael _A_T_ embeddedArm
_D_O_T_ com
> \_____ \ 16610 East Laser Drive #10
> / \ Fountain Hills, AZ 85268
> Technologic /_______ /ystems (480) 837-5200 / fax (480)
837-7300
> \/
>
Now that I downloaded the new driver, I tried to load it wityhout
success. I got this error in dmesg log: "TS-UART/RF2 did not detect a
TS-RF2 board. The 7800 board was shipped with the TS-RF2 and TS-GSM
already connected.
Can you help me?
regards,
G. Saderis
"
Yahoo! Groups Links
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|