Re: [ts-7000] Re: TS-GSM1 and TS-RF2-ZIGBEE devices for TS-7800

["Michael Schmidt" <>]

On Thu, December 6, 2007 4:14 am, wizwally wrote:
> Now that I downloaded the new driver, I tried to load it wityhout
> success. I got this error in dmesg log: "TS-UART/RF2 did not detect a
> TS-RF2 board. The 7800 board was shipped with the TS-RF2 and TS-GSM
> already connected.

Can you try it with just the TS-RF2-Zigbee board connected and see if you
get the same result?

Also, what jumper settings are you using on both boards?

> Can you help me?
>
> regards,
> G. Saderis


 ______   Best Regards,
|__  __/                  Michael Schmidt
   ||                   Software Engineer
   ||echnologic Systems (EmbeddedARM.com)
   || (480)    16610 East Laser Drive #10
   |/ 837-5200   Fountain Hills, AZ 85268
       http://oz.embeddedarm.com/~michael



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/