Paul,
I dd' the uncompressed ts7800-512mbsd.dd.bz2 to my sd card. This is
not in the ts-7800 subdir on ftp://oz.embeddedarm.com/ but in the
root. This seems to boot. Fdisk will complain about partitions if you
try to look at them. What you did below, and from my other reply seems
to end up with broken links to /etc among other locations.
David.
--- In Paul Wachendorf <> wrote:
>
> Hi,
> I have an TS-7800. I tried to create an bootable Sdcard, and therefor
> created the following partitions:
> /dev/tssdcardb1 4Mb
> /dev/tssdcardb2 4Mb
> /dev/tssdcardb3 4Mb
> /dev/tssdcardb4 rest of the card
>
> I left partition1 empty, copied the Kernel image on the 2nd, busybox
> initrd on the 3th and an debian system on the 4th, but booting
didn't work:
> When I wrote exit in the fastboot shell, the system made a fallback
boot
> on /dev/mtdblock3. So I just wanted to have a look at the mtdblock
> patitions to examine that I did wrong. Mounting of /dev/mdtblock1
was a
> bad Idea. It only showed me an lost+found folder and obviously crashed
> the kernel image, cause booting now crashes with the message:
> !00000354!00000487!00000072!000007bc!00000567>> flash ECC error!
> Setting Jumper 1 to boot from sdcard just gives a
> >> TS-BOOTROM - built Oct 4 2007
> >> Copyright (c) 2007, Technologic Systems
> and than hangs. So I think there is something wrong with the kernel
> image. Was It right just to copy the vmlinux file to /dev/tssdcard2? Or
> should I use dd?
> Please help me.
> Thanks,
>
> Paul
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|